Monport
Monport 60W JPT & MOPA Fiber Laser Engraver with 3D & Deep Engraving
#807 in Engraving Machines & Tools on Amazon
$3,299.99at Amazon, price as of 13 August 2026, 09:10 UTC. Subject to change.
6.9″ × 6.9″ working areaOur conversion of the 175*175mm the listing states — 47.6 square inches of bed.
We may earn a commission from this link, at no extra cost to you.
Buy at AmazonEverything below is the listing’s own claim, quoted with the date we read it.
What Laser Oracle checked on this listingThe counts above in full, and the limits of reading a listing
Laser Oracle tracks the Monport 60W JPT & MOPA Fiber Laser Engraver with 3D & Deep Engraving because it is among the best-selling fiber laser engravers on Amazon, currently #807 in Engraving Machines & Tools. According to the Amazon product page, read 13 August 2026, it sells for $3,299.99. That figure and the stock status come from the Amazon Product Advertising API and are refreshed every three hours, so neither is ever more than 24 hours old. The listing states a working area of 175*175mm, which is 6.9 by 6.9 inches, or 47.6 square inches of bed. That conversion is ours; the dimensions are theirs. Laser Oracle checks every listing in this category against four specifications that decide the purchase, and this one does not state rotary included or sold separately. That is a fact about the listing rather than about the product: a seller who prints no figure has not told us the product lacks one. There is no sourced specification review on this page and there is not going to be one until there is a document to cite: the brands that lead this category publish no manuals or spec sheets, which is itself the reason these pages measure listings rather than restate them. Everything quoted below is the seller's own wording from the listing, read 13 August 2026, and it is a claim rather than a measurement anyone has checked. Laser Oracle does not test machines and does not claim to.
What this listing states
Checked against the specifications that decide a fiber laser engraver purchase.
| Specification | In this listing | Across the category |
|---|---|---|
| Source type (MOPA or Q-switched) | Stated | 4 of 8 listings |
| Marking area | Stated | 4 of 8 listings |
| Rotary included or sold separately | Listing does not say whether a rotary is included | 1 of 8 listings |
| Lens focal length | Stated | 2 of 8 listings |
“Stated” means the figure appears in the title or the bullets. It is not a verification, and an absence is a fact about the listing rather than the product.
What the listing claims
Quoted from the Amazon listing, read 13 August 2026. These are the seller’s words, not our measurements.
- “Brand New Integrated Mini Fiber Laser:The brand new Monport fiber marking machine has a smaller size and lighter weight; Simultaneously maintaining the original high performance and a lifespan of up to 100000 hours.The fiber laser can engrave all metals. (gold, silver, copper, stainless steel, brass, titanium, etc.)”
- “Faster and More Accurate:The newly customized galvanometer system is equipped with more expensive silicon material reflectors, allowing for a maximum speed of 10000mm/s. Monport has also customized an F-theta field mirror, which, together with the entire marking system, can achieve a carving accuracy of 0.01mm.”
- “Gold Mrking Area:For a mopa fber laser, a marking area of 175*175mm is optimal.Excessive engraving area may result in poor engraving effect or even distortion.After special tuning by Monport, even when carving at the edges, there will be no weak light.”
- “True Color Marking:Monport uses JPT MOPA laser to achieve true color marking, including stainless steel color marking, brass color marking, aluminum blackening and other applications (Frequency adjustable range 1-4000kHz, pulse width adjustable range 2-500ns).You can set different parameters to achieve various colors, and of course Monport will also provide a large number of color printing parameters as a reference.”
- “Deep Engraving and Cutting Capabilities:With this 60W fiber laser marking machine, you can perform 2.5D metal engraving, deep metal engraving, and even some metal sheet cutting (usually the higher the power, the stronger the deep engraving and cutting ability, and the higher the efficiency.”
- “Laser class: Class 5,Power output: 60W”
What this listing does not tell you
- Rotary included or sold separately. Tumblers, rings and bottles are why most people buy one of these, and they all need a rotary. Whether it is in the box is a several-hundred-dollar difference the price alone does not show.
It does state source type (mopa or q-switched) and marking area and lens focal length, which is more than most of the category manages.
Check your room firstIf this one is not right
The other fiber laser engravers Laser Oracle tracks.
G·WEIKE
GWEIKE G2 Max 50W Fiber Laser Engraver with 3D & Deep Engraving
$2,499
See price and claimsImage: Amazon
Monport
Monport 30W Fiber Laser Engraver with LightBurn
$1,800
See price and claimsImage: Amazon
G·WEIKE
GWEIKE G2 Pro 30W Fiber Laser Engraver with 3D & Deep Engraving
$1,599
See price and claimsImage: Amazon
OMTech
OMTech 30W Fiber Laser Engraver
$1,600
See price and claimsImage: Amazon
xTool
xTool F2 Ultra 60W MOPA & 40W Diode Dual Laser Engraver
$4,999$6,499Save $1,500
See price and claimsImage: Amazon
xTool
xTool F2 Ultra Single 60W MOPA Fiber Laser Engraver
$3,999$4,999Save $1,000
See price and claimsImage: Amazon