OMTech 50W Fiber Laser Marking Machine with Lightburn and Rotary Aix

Name: OMTech 50W Fiber Laser Marking Machine with Lightburn and Rotary Aix
Brand: OMTech
SKU: B0DT8W1VC4
Price: 2549.99 USD
Availability: InStock

#538 in Engraving Machines & Tools on Amazon

$2,549.99at Amazon, price as of 16 August 2026, 07:27 UTC. Subject to change.

We may earn a commission from this link, at no extra cost to you.

Buy at Amazon

Everything below is the listing’s own claim, quoted with the date we read it.

What Laser Oracle checked on this listingThe counts above in full, and the limits of reading a listing

Laser Oracle tracks the OMTech 50W Fiber Laser Marking Machine with Lightburn and Rotary Aix because it is among the best-selling fiber laser engravers on Amazon, currently #538 in Engraving Machines & Tools. According to the Amazon product page, read 16 August 2026, it sells for $2,549.99. That figure and the stock status come from the Amazon Product Advertising API and are refreshed every three hours, so neither is ever more than 24 hours old. Laser Oracle checks every listing in this category against four specifications that decide the purchase, and this one does not state source type (mopa or q-switched), marking area, rotary included or sold separately, lens focal length. That is a fact about the listing rather than about the product: a seller who prints no figure has not told us the product lacks one. There is no sourced specification review on this page and there is not going to be one until there is a document to cite: the brands that lead this category publish no manuals or spec sheets, which is itself the reason these pages measure listings rather than restate them. Everything quoted below is the seller's own wording from the listing, read 16 August 2026, and it is a claim rather than a measurement anyone has checked.

What this listing states

Checked against the specifications that decide a fiber laser engraver purchase.

Which decision-grade specifications this listing states
Specification	In this listing	Across the category
Source type (MOPA or Q-switched)	No source type in the listing	4 of 9 listings
Marking area	No marking area stated	4 of 9 listings
Rotary included or sold separately	Listing does not say whether a rotary is included	1 of 9 listings
Lens focal length	No lens focal length stated	2 of 9 listings

“Stated” means the figure appears in the title or the bullets. It is not a verification, and an absence is a fact about the listing rather than the product.

What the listing claims

Quoted from the Amazon listing, read 16 August 2026. These are the seller’s words, not our measurements.

“All-in-one Fiber Laser：OMTech 50W all metal body fiber laser engraver defines a new generation of machines. It achieves a smaller size, cooler appearance, and provides a more user-friendly user experience while maintaining the original performance”
“0.01mm and 10000mm: 5.9''X5.9''workbed Fiber laser machine with a spot diameter of 0.01 mm，and the field lens uses its air-spaced design and protective & anti-reflective coatings to provide throughput with less than 1% distortion,maximum engraving speed up to 10000 mm/s，which helps you to get the job done accurately and quickly”
“Laser engraver equiped a red dot indicator to assist you in adjusting the focus，you can control the startup and shutdown of the red dot guider by pressing the focus button with only one finger”
“Operation Guidance:We've added text instruction next to each button on the machine body, and this laser engraver comes with lightburn/EzCad2 software, which is compatible with both 32-bit and 64-bit versions of Windows 7, 8, and 10, and supports a wide range of image formats, so you can get started quickly!”
“Global Customer Service: We have established 24H service team, located in US、Philippines and China, at the same time, we have more than 50 Demo Room Hosts in US, and the number continues to rise.We will provide you with comprehensive and professional pre-sales, after-sales service, technical support and on-site experience by appointment，and we provide 2 years support for our products to solve your worries.”
“Laser Class 2,0.874 mW output power Model Number：LYF-50W”

What this listing does not tell you

Source type (MOPA or Q-switched). A MOPA source lets you set the pulse duration, and that one adjustable parameter is what produces colour on stainless and marks thin anodised aluminium without burning through. It decides what the machine can make; wattage only decides how fast.
Marking area. The lens sets the field, and a fiber marking field is small, often under 8 inches square. A listing that names a wattage and no field has left out the dimension that decides whether your work fits.
Rotary included or sold separately. Tumblers, rings and bottles are why most people buy one of these, and they all need a rotary. Whether it is in the box is a several-hundred-dollar difference the price alone does not show.
Lens focal length. The lens is what trades field size against power density. Swapping it is how you get a bigger field or a deeper mark, so the one it ships with sets the machine’s default behaviour.

$3,999$4,999Save $1,000

See price and claims

Image: Amazon

What people buy this kind of machine to make

Each guide opens with what the technology cannot do for that material, then the shortlist. Only materials this machine’s laser source can work are listed.

Best laser engravers for metal