Buyer guide
Laser engravers for jewelry: gold takes a fifth the depth of silver
Laser Oracle tracks every machine on Amazon whose maker states it marks gold, silver or platinum, priced within the last three hours. Precious metal needs a fiber or a UV source and nothing else touches it, which settles the machine tier before budget enters the decision. What the listings never show is how far apart the metals are from each other.
All buyer guidesPrecious metal needs a fiber or a UV source and nothing else will touch it, which settles the machine tier before budget enters the decision. What the listings never show is how far apart the metals are: xTool publishes 1mm of cut depth in silver and 0.2mm in gold from the same machine, because gold reflects more and conducts heat away faster.
14 machines are in stock on Amazon today, from $1,599. Prices refresh every three hours.
Every figure behind this guide, sourced and datedThe full finding: counts, ordering, and the spec nobody prints
Laser Oracle tracks 14 laser machines in stock on Amazon today, with prices from the Amazon Product Advertising API refreshed every three hours, starting at $1,599. The list is ordered by Amazon's own category placement rather than by our preference; the best-placed machine currently sits at #89 in Engraving Machines & Tools. 13 of them carry a full sourced review here, with the workspace requirement, license cost and software compatibility read from each manufacturer's own pages. The gap a buyer should know about: of the reviewed machines in this bracket, none publishes an optical output figure, as distinct from the wattage on the box. Laser Oracle does not test machines: every figure on this page is a live listing value or a quotation from a manufacturer document, dated when it was read.
What marks jewelry, and what does not
The source decides this, not the wattage. Quoted from each maker’s own documentation, with the date it was read.
| Material | Fiber1064nm | CO210.6µm | Diode450nm | UV355nm | What decides it |
|---|---|---|---|---|---|
| Gold, silver and platinum | Marks it | No | No | Marks it | xTool publishes 1mm for silver and 0.2mm for gold on MOPA fiber, and the gap between those two figures is the point: gold is more reflective and more thermally conductive, so the same machine cuts a fifth as deep into it. |
| Stainless steel | Marks it | No | No | Marks it | Eight machines publish a cut depth for stainless, xTool at 2mm on MOPA fiber. A MOPA source additionally colour-marks it by tuning pulse duration, which a plain fiber source cannot do, and neither a diode nor a CO2 tube marks it bare at all. |
| Bare stainless, brass, titanium | Marks it | No | No | Marks it | Bare metal reflects the 450nm light a diode emits and absorbs the 1064nm a fiber source emits. This is the one line in the table that no wattage and no number of passes changes. |
xTool: xTool F2 Ultra 60W MOPA & 40W Diode Dual Laser EngraverRead 2026-08-14
ComMarker: ComMarker B6 JPT MOPA Fiber Laser EngraverRead 2026-08-14
xTool: xTool M2 Color Craft Laser Engraver & CutterRead 2026-08-14
What each maker publishes about jewelry
No maker publishes a figure for jewelry as such, because it is a use rather than a material. 4 of the 14 machines in stock below publish a claim for gold, silver or platinum, which is what one is made of. This is what each states, quoted, with the date it was read.
| Machine | The maker’s own wording | Cut depth published |
|---|---|---|
 xTool F2 Ultra 60W MOPA & 40W Diode Dual Laser EngraverxTool: xTool F2 Ultra 60W MOPA & 40W Diode Dual Laser EngraverRead 2026-08-14 | “Silver” | 1 mm |
 Monport 30W Fiber Laser Engraver with LightBurnMonport: Monport GM Series Full Specifications (GM30 Pro, GM50 Pro, GM30 Mopa Pro, GM60 Mopa Pro)Read 2026-08-15 | “Gold and silver” | Marks it. No cut depth published |
 Monport 60W JPT & MOPA Fiber Laser Engraver with 3D & Deep EngravingMonport: Monport GM Series Full Specifications (GM30 Pro, GM50 Pro, GM30 Mopa Pro, GM60 Mopa Pro)Read 2026-08-15 | “Gold and silver” | Marks it. No cut depth published |
 ComMarker B6 60W JPT Mopa Fiber Laser EngraverComMarker: ComMarker B6 JPT MOPA Fiber Laser EngraverRead 2026-08-14 | “Aluminium, brass, copper, gold and silver” | Marks it. No cut depth published |
We may earn a commission from links on this page, at no extra cost to you. It does not change which products appear or in what order.
8.4Amazon's best-placed
xTool F2 Ultra Single 60W MOPA Fiber Laser Engraver
Amazon: #89 in Engraving Machines & Tools
$3,999$4,999Save $1,000
Check price at AmazonImage: Amazon
4.9The lowest price today
GWEIKE G2 Pro 30W Fiber Laser Engraver with 3D & Deep Engraving
Amazon: #262 in Engraving Machines & Tools
$1,599
Check price at AmazonImage: Amazon
9.4Fully reviewed here
xTool F2 Ultra 60W MOPA & 40W Diode Dual Laser Engraver
Space, subscriptions and compatibility, sourced and dated
$4,999$6,499Save $1,500
Check price at AmazonImage: Amazon
13 of these carry sourced specificationsEvery figure on those pages is quoted from the maker's own documentation, with the date it was read.
- xTool F2 Ultra Single 60W MOPA Fiber Laser Engraver
- xTool F2 Ultra 60W MOPA & 40W Diode Dual Laser Engraver
- xTool F2 Ultra UV Laser Engraver
- ComMarker XE 6W UV Engraving Machine
- xTool F1 Ultra 20W Fiber & Diode Dual Laser Engraver
- ComMarker X 6W UV Engraving Machine
- Creality Laser Engraver Falcon T1 UV 5W for Glass Acrylic Cerami…
- G·WEIKE GWEIKE G2 Pro 30W Fiber Laser Engraver with 3D & Deep En…
- Monport 30W Fiber Laser Engraver with LightBurn
- OMTech 30W Fiber Laser Engraver
- Monport 60W JPT & MOPA Fiber Laser Engraver with 3D & Deep Engra…
- G·WEIKE GWEIKE G2 Max 50W Fiber Laser Engraver with 3D & Deep En…
- ComMarker B6 60W JPT Mopa Fiber Laser Engraver
Every machine, compared
Ordered by Amazon’s category placement, refreshed every three hours.
| Model | Price today | Amazon placement | Spec score |
|---|---|---|---|
| xTool F2 Ultra Single 60W MOPA Fiber Laser EngraverxTool | $3,998.99 | #89 in Engraving Machines & Tools | 8.4 |
| xTool F2 Ultra 60W MOPA & 40W Diode Dual Laser EngraverxTool | $4,998.98 | #89 in Engraving Machines & Tools | 9.4 |
 xTool F2 Ultra UV Laser EngraverxTool | $3,999 | #90 in Engraving Machines & Tools | 8.4 |
 ComMarker XE 6W UV Engraving MachineComMarker | $3,299 | #108 in Foil Engraving | 9.0 |
 xTool F1 Ultra 20W Fiber & Diode Dual Laser EngraverxTool | $2,898 | #113 in Engraving Machines & Tools | 8.0 |
 ComMarker X 6W UV Engraving MachineComMarker | $3,599 | #114 in Industrial Machines | 9.5 |
 Creality Laser Engraver Falcon T1 UV 5W for Glass Acrylic CeramicsCreality | $3,999 | #183 in Fluorescent Lamps | 7.9 |
| GWEIKE G2 Pro 30W Fiber Laser Engraver with 3D & Deep EngravingG·WEIKE | $1,599 | #262 in Engraving Machines & Tools | 4.9 |
| Monport 30W Fiber Laser Engraver with LightBurnMonport | $1,799.99 | #331 in Engraving Machines & Tools | 10.0 |
 OMTech 30W Fiber Laser EngraverOMTech | $1,599.99 | #369 in Engraving Machines & Tools | 4.5 |
 OMTech 50W Fiber Laser Marking Machine with Lightburn and Rotary AixOMTech | $2,549.99 | #369 in Engraving Machines & Tools | Price-tracked only |
| Monport 60W JPT & MOPA Fiber Laser Engraver with 3D & Deep EngravingMonport | $3,699.99 | #422 in Engraving Machines & Tools | 10.0 |
 GWEIKE G2 Max 50W Fiber Laser Engraver with 3D & Deep EngravingG·WEIKE | $2,499 | #656 in Engraving Machines & Tools | 5.4 |
| ComMarker B6 60W JPT Mopa Fiber Laser EngraverComMarker | $3,999 | #893 in Engraving Machines & Tools | 7.6 |
“Price-tracked only” means we hold the live listing but have not yet sourced the manufacturer’s specification sheet for it.
The best-placed listings, live
The 6 Amazon places highest of the 14 in the table above. We may earn a commission from these links, at no extra cost to you. It does not change which products appear or in what order.
8.4xTool
xTool F2 Ultra Single 60W MOPA Fiber Laser Engraver
Amazon: #89 in Engraving Machines & Tools
$3,999$4,999Save $1,000
Check price at AmazonImage: Amazon
8.4xTool
xTool F2 Ultra UV Laser Engraver
Amazon: #90 in Engraving Machines & Tools
$3,999$5,299Save $1,300
Check price at AmazonImage: Amazon
9.0ComMarker
ComMarker XE 6W UV Engraving Machine
Amazon: #108 in Foil Engraving
$3,299
Check price at AmazonImage: Amazon
8.0xTool
xTool F1 Ultra 20W Fiber & Diode Dual Laser Engraver
Amazon: #113 in Engraving Machines & Tools
$2,898$4,499Save $1,601
Check price at AmazonImage: Amazon
9.5ComMarker
ComMarker X 6W UV Engraving Machine
Amazon: #114 in Industrial Machines
$3,599
Check price at AmazonImage: Amazon
7.9Creality
Creality Laser Engraver Falcon T1 UV 5W for Glass Acrylic Ceramics
Amazon: #183 in Fluorescent Lamps
$3,999
Check price at AmazonImage: Amazon
What else jewelry needs
Not extras. These are the parts of the job the machine does not come with, and the lines people leave out when they compare two prices.
Optics and safety
Eyewear has to match the wavelength the machine emits, and the two are not interchangeable. A fiber source at 1064nm, a CO2 tube at 10,600nm and a diode at 450nm each need their own, and a pair rated for one gives no protection against another.
JILERWEAR
JILERWEAR Professional OD6+ CO2 Laser Safety Glasses
$36
Check price at AmazonImage: Amazon
Rotary attachments
A ring is a cylinder with a very small diameter, and marking the inside of a band is the job that sells this accessory. A flat bed cannot present that surface to the beam at all.
CREALITY FALCON
CREALITY FALCON Rotary Roller Pro
$110$127Save $17
Check price at AmazonImage: Amazon
How this list was builtThe screen, the ordering, and what we do not do
The screen is mechanical: every machine we track on Amazon that is in stock, carries a live price, and is not a duplicate listing. The order is Amazon’s own category placement, read from the Product Advertising API and refreshed every three hours. Laser Oracle does not test machines and has no preference to encode; where a unit has a full review here, the review quotes the manufacturer’s own documents with the date each was read. Guide copy last reviewed 2026-08-20.